The easiest way to convert a conventional spray zone to a low-volume irrigation zone
The Rain Bird® 1800-RETRO is the easiest and fastest way to convert conventional spray zones into low-volume irrigation zones. The 1800-Retro internal assembly is easily installed into any existing 1804 spray head body to retrofit an existing system to drip irrigation.
Spray-to-Drip Retrofit Kit allows the use of existing 1800 Series Spray Bodies as drip irrigation connection points.
SPRAY-TO-DRIP RETROFIT KIT (1800-RETRO)
• Permits convenient conversion to drip tubing with included low-profile fittings
• Provides 30 psi (2,0 Bars) pressure regulation and 200-mesh (75 microns) screen that is easily accessible
• Supports flow rate of 0.5 to 6 gpm • Internal assembly drops into any 1804 spray head body to easily retrofit existing systems to drip irrigation
• Comes with low profile Barb Tee and Elelbow-fitting
Installation
• Remove the top of any 1800 and remove the internal assembly (On 1806 and 1812, leave the spring in the body)
• Remove the internal assembly of the retro kit and drop it into the existing body
• Tighten the cap
• Use included Elbow or Tee Fittings to connect to drip tubing or connect other ½” FPT devices
The Rain Bird® 1800-RETRO is the easiest and fastest way to convert a conventional spray zone to a low-volume irrigation zone. The 1800-Retro internal assembly is easily installed into any existing 1804 spray head body to retrofit an existing system to drip irrigation.
